Macinstosh Settings
Installation Steps
1. Connect the Novatel MiFi 2200 to your computer using the USB cable that was provided.
2. The install steps should start automatically, and you will see a screen similar to the one below.
3. Click on the Installer.pkg to start the install
4. Press Continue
5. View the License Agreement, Press Continue
6. Press Agree
7. Highlight Destination, and Press Continue
8. Press Install
9. Installer requires you enter your information. Complete Name and Password for your computer. Press OK
10. You need to restart your computer to complete the installation, Press Continue Installation
11. As your computer restarts you should see a screen similar to the one below, informing you the software is being installed.
12. Install Complete.
13. You may see the Mobilink dashboard, if not you should see a Mobilink shortcut icon on your desk top, click on the icon
14. Mobilink Dashboard
15. Click Connect
16. To disconnect, Press Disconnect. button as shown above
17. You can see which the network you are connected to by (need to add exact steps)
18. To ensure you setup a secured network, you will need to create and enter a Password.
To use the device yourself you can connect using the USB cable.
To establish a WiFi Hotspot, you must connect to your computer via WiFi. Up to five (5) other users will then be able to connect to your MiFi WiFi hot spot. You will need to share your password with the other users.
For more information, please consult the User Guide. The userguide is a pdf file on the MiFi device, plus a copy is also below in this document.
Windows Settings
Installation Steps
1. Hook up the provided USB cable to the Mifi 2200 device, and to your computer.
2. The install steps should start automatically, and you will see a screen similar to the one below.
(Note: If drivers need to loaded, they are available at http://home.gci.net/~omni, Under Novatel Drivers, select Windows Driver Version3 for Novatel Xtreme Mobility Cards)
3. The program will continue to install
4. You will then see the start of the InstallShield Wizard
5. Press Next
6. Click the spot next to “I Accept the terms in the licence agreement”
7. Press Next
8. Press Install
9. After it completes, click Next
10. Click Finish
11. You may see the Mobilink dashboard, if not you should see a Mobilink shortcut icon on your desk top, click on the icon
12. Mobilink Dashboard
13. Click Connect
14. To disconnect, Press Disconnect. button as shown above
15. You can see which the network you are connected to by (need to add exact steps)
To use the device yourself you can connect using the USB cable.
To establish a WiFi Hotspot, you must connect to your computer via WiFi. Up to five (5) other users will then be able to connect to your MiFi.
