Huawei EC 168 Settings

Macintosh Settings

Installation Steps

1. Insert the card into your USB port, a screen similar to the one below should appear

2. Click on the Xtreme Mobility Icon

3. Ensure other applications are closed and click Continue

4. Click Continue

5. To accept the Software License Agreement, click Agree

6. Click Continue

7. Click Install

8. Enter your Username and Password and press OK

Loading

Finished

9. Click Close

10. Click on Connect

You should now be connected, and be able to perform Internet functions.

Uninstalling

1. Click on MAC Harddirve

2. Right Click on the Application (Xtreme Mobility)

3. Move application to the trash

Note: If you have a 3rd party application, such as APP Zapper, follow your normal steps for that application.

 

Windows XP Settings

Installation Steps

1. Insert Huawei Modem into a USB2.0 port

2. Xtreme Mobility Setup Wizard should automatically appear

3. Click Next

4. Read the License Agreement, when finished, press I Agree

5. To keep the default Destination Folder (GCI Recommended), press Next

6. To keep the default Install Location (GCI Recommended), press Next

7. To keep the default Start Menu Folder (GCI Recommened), press Install

You will see a screen displaying the Install progress

8. You may see indication of the new hardware being installed on your system tray similar to

9. Then press Finish

10. On your desktop you will see an Xtreme Mobility icon.

11. Double Click on the Xtreme Mobility Icon

12. Press Connect

13. You are now connected, you will see data transfer information on the bottom of the menu screen.

Uninstalling

1. Open the Control Panel

Start | Control Panel

2. Double click on the Add or Remove Program (Programs on Vista)

3. Scroll down to and highlight the Xtreme Mobility icon

4. Click on the Remove button

5. The program (application) will uninstall.

 

Windows Vista Settings

Installation Steps

1. Insert the Huawei device into a USB 20. port.

2. Wait for the auto-screen to appear

001_image

3. Click on Run AutoRun.exe

4. Depending on any security software on your computer, you may see a message concerning this change, Allow the change.

002_image

5. You will see a Setup Wizard Appear

003_image

6. Click Next

004_huawei_vista.gif

7. Click on I Agree to accept the End License Agreement.

005_huawei_vista.gif

8. Click Next

006_huawei_vista.gif

9.Click Install

007_huawei_vista.gif

10. After finishing the install

008_huawei_vista.gif

11. Click Finish

12. You will see a new desktop icon

009_huawei_vista.gif

13. Double click on the Mobile (Partner) icon.

010_huawei_vista.gif

14. Click on Connect

011_huawei_vista.gif

15. If you see a Security Message, click Remember this decision box and then click Allow. This example demonstrates GCI Security Guard.

012_huawei_vista.gif

16. Click where you will be using this computer. This is a Windows Vista Security screen.

17. You may need to click Connect again, but you should be connected at this time.

18. By clicking into the Static’s you can view you connection information, or along the bottom of the Mobile Broadband menu screen.

013_huawei_vista.gif

19. Click the Disconnect button to disconnect.

Uninstalling

1. Open the Control Panel

Start | Control Panel

2. Double click on the Add or Remove Program (Programs on Vista)

3. Scroll down to and highlight the Xtreme Mobility icon

4. Click on the Remove button

5. The program (application) will uninstall.